wp4939e6e6_0f.jpg
wpeeb3f586.png

© 2008 custom-patches.co.uk

wpeedde796.png

wp79441415.png

wpde23c783.png

wpf24817cb.png

wpffebd651.png

wp8b5c5a12.png

wp8821f8eb.png

wp4328ba7b.png

wp29cc5a9a.png

wp1234370b.png
CUSTOM PATCHES
wp427e5987.png
wp3722bc99_0f.jpg
wp2b7a98f9_0f.jpg
wp6e0c1a32_0f.jpg
wp265bbc30_0f.jpg
wp385667a0_0f.jpg
wp16993637_0f.jpg
wp021d02cd_0f.jpg
wpc4dc7f47_0f.jpg
wpc6af5e57.png
wp4a119282.png
wp575bdf67.png

Generally with patches with Iron-on backing, we would strongly recommend that the border is a hot-knife border.

 

This is where the border is applied as part of the embroidery before the patch is cut out from the base material using a hot knife, the border is generally not so proud as the Merrow Border (see Sew On Patches), but allows for the glue to be prominent right to the edges of the patch.

 

 


 

wp6dea0001.png
wpccc036e3.png
wp0b1db7ec_0f.jpg
wpf43aafeb.png

When applying the patch, place patch in desired position, cover with greaseproof paper or protective cover.

Apply heat for approx 20-30 seconds, if when looking at the patch it has not adhered all round, repeat for another 5-10 seconds.  You can also turn the garment inside out and apply heat for around 10 seconds.

The embroidered patch is manufactured and a strong adhesive glue is applied to the reverse of the patch.  When placed into position on your garment and heat is applied (using ideally a commercial heat-press) the glue is melted and is absorbed into the pores of the fabric, giving a life-long permanent adhesion to your garment.

 

Please note: At present, the glue will not adhere to any materials that have been pre-treated with any repellents, these include water-proof sports coats etc.